Festo

Festo CAMC-DN DeviceNet Interface Module (Part No. 547451) Item Overview Up for sale is a used Festo CAMC-DN plug-in interface module. This communication module is designed to integrate Festo motor controllers (including the CMMP-AS, CMMS-AS, and CMMS-ST series) into a DeviceNet network. The item has been pulled from a working industrial environment. Technical Specifications Manufacturer: Festo Model/Type: CAMC-DN Part Number: 547451 Communication Protocol: DeviceNet (Fieldbus) Connection Type: 5-pin open connectorWeight: Approx. 49g Compatibility: Designed for use with Festo CMMP-AS, CMMS-AS, and CMMS-ST servo/stepper motor controllers (please verify compatibility with your specific controller before purchase). Condition Status: Used / Pre-owned. Operational Condition: Removed from a fully functioning system. Cosmetic Condition: Good industrial condition. May show minor signs of standard use, such as light scuffs or dust, which do not affect functionality. Included: One (1) Festo CAMC-DN module only.

Festo CAMC-F-PN Rev. 04 Ver. 2.4 PROFINET Interface Module (Part No. 1911916) Item Overview Up for sale is a used Festo CAMC-F-PN plug-in interface module. This communication module is designed to integrate Festo motor controllers (such as the CMMP-AS series) into a PROFINET RT network. The item has been pulled from a working industrial environment. Technical Specifications Manufacturer: Festo Model/Type: CAMC-F-PN Part Number: 1911916 Revision: Rev 04 Version: 2.4 Communication Protocol: PROFINET (Fieldbus) Port Configuration: Dual Port (Integrated Switch) Compatibility: Designed for use with Festo CMMP-AS motor controllers (please verify compatibility with your specific controller before purchase). Condition Status: Used / Pre-owned. Operational Condition: Removed from a fully functioning system. Tested and guaranteed to work. Cosmetic Condition: Good industrial condition. May show minor signs of standard use, such as light scuffs or dust, which do not affect functionality. Included: One (1) Festo CAMC-F-PN module only. Manuals, original packaging, and external cables are NOT included.

Festo CMMP-AS-C2-3A-M3 Premium Servo Motor Controller w/ CAMC-DS-M1 Switch Module (Tested + Video)Item Condition: Used, Tested, and Verified FunctionBrand: FestoOrder nr.: 1501325 Rev 06HW version: 6.3FW version: 4.0.1501.2.1Main Part Number: CMMP-AS-C2-3A-M3 Module Part Number: CAMC-DS-M1Product OverviewUp for sale is a used, fully operational Festo CMMP-AS-C2-3A-M3 Premium Motor Controller, pre-installed with the CAMC-DS-M1 Switch Module. This highly dynamic servo drive is engineered for complex, multi-axis movements and synchronous tasks. The unit has been strictly tested in a closed-loop setup, and a dedicated test video is available to verify its operating condition prior to purchase.Ideal as a drop-in replacement to minimize machine downtime or for integrating into new automation builds.Technical Specifications1. Motor Controller: CMMP-AS-C2-3A-M3Controller Class: Premium (M3 variant with 3 extension slots for fieldbus, safety, or I/O cards)Nominal Input Voltage: 100 V ... 230 V AC (1-phase)Nominal Current: 2.5 APeak Current: 5 ASupported Motor Types: AC synchronous, linear, and torque motorsEncoder Interfaces: Supports standard high-resolution encoders (Resolver, EnDat, HIPERFACE, incremental)Control Functions: Position control, speed control, torque control, and electronic camming.Condition & TestingCondition: Used. The housing and terminals are in good structural condition with minor cosmetic wear expected from standard industrial cabinet mounting.Testing Rigor: The drive have been powered on and bench-tested.Video Proof: Watch a sample unit in action. All units tested to the same standard. The video demonstrates basic motor jogging.What’s Included in the Box(1x) Festo CMMP-AS-C2-3A-M3 Motor Controller(1x) Festo CAMC-DS-M1 Switch Module (Installed)(Note: Connectors, wiring, and external fieldbus cards are NOT included unless pictured. Please review the photos carefully to see exactly which terminal blocks are attached.)

Festo CMMP-AS-C2-3A-M3 Premium Servo Motor Controller w/ CAMC-G-S1 Safety Module (Tested + Video)Item Condition: Used, Tested, and Verified FunctionBrand: FestoOrder nr.: 1501325 Rev 08HW version: 6.5FW version: 4.0.1501.2.3 Main Part Number: CMMP-AS-C2-3A-M3 Module Part Number: CAMC-G-S1Product OverviewUp for sale is a used, fully operational Festo CMMP-AS-C2-3A-M3 Premium Motor Controller, pre-installed with the CAMC-G-S1 Safety Module. This highly dynamic servo drive is engineered for complex, multi-axis movements and synchronous tasks. The unit has been strictly tested in a closed-loop setup, and a dedicated test video is available to verify its operating condition prior to purchase.Ideal as a drop-in replacement to minimize machine downtime or for integrating into new automation builds requiring high-precision STO (Safe Torque Off) capabilities.Technical Specifications1. Motor Controller: CMMP-AS-C2-3A-M3Controller Class: Premium (M3 variant with 3 extension slots for fieldbus, safety, or I/O cards)Nominal Input Voltage: 100 V ... 230 V AC (1-phase)Nominal Current: 2.5 APeak Current: 5 ASupported Motor Types: AC synchronous, linear, and torque motorsEncoder Interfaces: Supports standard high-resolution encoders (Resolver, EnDat, HIPERFACE, incremental)Control Functions: Position control, speed control, torque control, and electronic camming.2. Safety Module: CAMC-G-S1 (Pre-installed)Safety Functions: * STO (Safe Torque Off)SS1 (Safe Stop 1)Safety Level: Designed to meet PL e (Performance Level e) / SIL 3 (Safety Integrity Level 3) requirements.Integration: Plugs directly into the Ext3 slot of the CMMP-AS drive.Condition & TestingCondition: Used. The housing and terminals are in good structural condition with minor cosmetic wear expected from standard industrial cabinet mounting.Testing Rigor: The drive and safety module have been powered on and bench-tested.Video Proof: Watch a sample unit in action. All units tested to the same standard. The video demonstrates basic motor jogging.What’s Included in the Box(1x) Festo CMMP-AS-C2-3A-M3 Motor Controller(1x) Festo CAMC-G-S1 Safety Module (Installed)(Note: Connectors, wiring, and external fieldbus cards are NOT included unless pictured. Please review the photos carefully to see exactly which terminal blocks are attached.)

Festo SVG3/400VAC-48VDC-20A 542405 Power Supply UnitTested

Festo CMMO-ST-C5-1-DIOP + ELGR-TB-45-200 + EMMS-ST-87-S-SE-G2 KITStepper motor Driver + Cables + Stepper motor + Toothed Belt AxisTested with TestvideoFesto EMMS-ST-87-S-SE-G2 1370483 Stepper MotorFesto ELGR-TB-45-200 560506 Toothed Belt AxisFesto CMMO-ST-C5-1-DIOP 1512316 Stepper motor driverCablesFESTO-KIT1