Beckhoff
Beckhoff EL6002 Rev. 0019 EtherCAT Terminal, 2-channel communication interface, serial, RS232, D-sub The EL6002 serial interface enables the connection of devices with two RS232 interfaces. The devices connected to the EL6002 EtherCAT Terminal communicate with the automation device via the Coupler. The active communication channel operates independently of the higher-level EtherCAT system in full duplex mode with 300 baud up to 115.2 kbaud. The RS232 interfaces guarantee high interference immunity through electrically isolated signals. In conjunction with the TwinCAT Virtual Serial COM Driver, the EL6002 can be used as a normal Windows COM interface.
Beckhoff IL2301-B310 IL2301 B310-0000 Coupler Box, 4-channel digital input + 4-channel digital output, PROFIBUS, 24 V DC, 3 ms, 0.5 A, M8
Beckhoff IE3112-0000 Extension Box, 4-channel analog input, current, 0/4…20 mA, 16 bit, differential, M12
Beckhoff IE1002-0000 Extension Box, 8-channel digital input, 24 V DC, 3 ms, M12
Beckhoff IE1001-0000 Extension Box, 8-channel digital input, 24 V DC, 3 ms, M8
Beckhoff EP1018-0001 EtherCAT Box, 8-channel digital input, 24 V DC, 10 µs, M8
Beckhoff EP1008-0001 EtherCAT Box, 8-channel digital input, 24 V DC, 3 ms, M8 The EP1008-0001 EtherCAT Box with digital inputs acquires the binary control signals from the process level and transmits them, in an electrically isolated form, to the controller. The state of the signals is indicated by light emitting diodes. The signals are connected via M8 screw type connectors. The sensors are supplied from the box supply voltage US. The load voltage UP is not used in the input module, but it can be optionally connected for forwarding and is passed on to the next module. The supply of the connected sensors is done by an internal, short-circuit proof driver module with a total of 0.5 A for all sensors. Due to the input filter of 3.0 ms, the EP1008-0001 is preferably suitable for electronic and mechanical inputs, which thereby experience additional debouncing of the signal.
Beckhoff ZK1090-3191-0050 5m EtherCAT Cable RJ45 M8 4-pin
Beckhoff ZK1090-3191-0030 3m EtherCAT Cable RJ45 M8 4-pin
Beckhoff AM8121-0F21-0000 48V Servo MotorUN 48 VDCnN3000 rpmI0 4 AmsPN 0.16KWM0 0.5 NmTested
Beckhoff AX2090-B200 Lightbus Interface
Beckhoff C6525-0050 i3-4110E 2.6Ghz 8GB W10 LTSB 2016 + Win 7 Emb Pro IPCCore i3-4110E 2.6Ghzinstalled Beckhoff Windows 10 LTSB 2016 and digitally activated online + Deployment ImagesWindows 7 Pro Embedded Sticker + Deployment Images320 GB HDDNo TwinCAT licensesScratch / Dent on the Heatsink
Beckhoff KL9110 Voltage Supply Terminal 24V DC max 10A with Diagnostics
