Agilent

Agilent N4010A Wireless Connectivity Test Set Serial Number: MY52230237 Main Firmware Version: A.05.06.02 Installed Options: 102: WLAN (2.4 GHz) 110: I/O Connectivity Condition & Testing Notes: The unit powers on and boots successfully. We have performed a basic RF self-test using an external spectrum analyzer to verify fundamental signal output. Important Operational Note: Please be aware that this instrument is designed primarily for automated/remote operation via its interface ports. The front panel keyboard only provides access to basic system menu functions. This is the normal, intended behavior for this specific configuration. Internal Hardware & Firmware Information: As verified via the System Service menu: MB (N4010-60025): HW Id=1, FW=05 PPMC (P1001-66501): HW Id=2, HW=04, FW=A.05.06.02 LSS (N4010-60030): HW Id=3, HW=2011AR, FW=C.01.09 FrontEnd (N4010-61043): HW Id=4, HW=3, FW=16 DAP (N4010-60001): HW Id=5, HW=106, DSPApp=04.01, DSPBoot=01.06, FPGA=B0 FP (N4010-61001): HW Id=6, FW=P.15 FreqExt (N4010-61049): HW Id=7, HW=4, FW=07 BBG (N4010-60007): HW Id=8, FPGA=2 What's Included: 1x Agilent N4010A Wireless Connectivity Test Set (as pictured and described) Note: Power cords, remote control cables, and other external accessories are NOT included unless explicitly stated. Disclaimer: Sold as-is based on the testing described above. Please review all details and ensure you have the correct software/environment to drive this instrument remotely before purchasing.