Festo

Upgrade or repair your pneumatic systems with the reliable Festo 542900 SDE5-D10-FP-Q4E-P-M8 Pressure Sensor. Designed for precise pressure monitoring in industrial automation applications, this sensor delivers accurate feedback and seamless integration into your existing setup.Brand: FestoPart Number: 542900 SDE5-D10-FP-Q4E-P-M8Product Type: Pressure SensorPressure Range: 0 to 10 barPneumatic Connection: Push-in connector 4mm (Q4E)Electrical Output: PNP (P)Electrical Connection: M8 Plug with cableCondition: Used - This item has been previously used but remains in good working condition, ready for immediate installation.

Festo CAMC-DN DeviceNet Interface Module (Part No. 547451) Item Overview Up for sale is a used Festo CAMC-DN plug-in interface module. This communication module is designed to integrate Festo motor controllers (including the CMMP-AS, CMMS-AS, and CMMS-ST series) into a DeviceNet network. The item has been pulled from a working industrial environment. Technical Specifications Manufacturer: Festo Model/Type: CAMC-DN Part Number: 547451 Communication Protocol: DeviceNet (Fieldbus) Connection Type: 5-pin open connectorWeight: Approx. 49g Compatibility: Designed for use with Festo CMMP-AS, CMMS-AS, and CMMS-ST servo/stepper motor controllers (please verify compatibility with your specific controller before purchase). Condition Status: Used / Pre-owned. Operational Condition: Removed from a fully functioning system. Cosmetic Condition: Good industrial condition. May show minor signs of standard use, such as light scuffs or dust, which do not affect functionality. Included: One (1) Festo CAMC-DN module only.

Festo CAMC-F-PN Rev. 04 Ver. 2.4 PROFINET Interface Module (Part No. 1911916) Item Overview Up for sale is a used Festo CAMC-F-PN plug-in interface module. This communication module is designed to integrate Festo motor controllers (such as the CMMP-AS series) into a PROFINET RT network. The item has been pulled from a working industrial environment. Technical Specifications Manufacturer: Festo Model/Type: CAMC-F-PN Part Number: 1911916 Revision: Rev 04 Version: 2.4 Communication Protocol: PROFINET (Fieldbus) Port Configuration: Dual Port (Integrated Switch) Compatibility: Designed for use with Festo CMMP-AS motor controllers (please verify compatibility with your specific controller before purchase). Condition Status: Used / Pre-owned. Operational Condition: Removed from a fully functioning system. Tested and guaranteed to work. Cosmetic Condition: Good industrial condition. May show minor signs of standard use, such as light scuffs or dust, which do not affect functionality. Included: One (1) Festo CAMC-F-PN module only. Manuals, original packaging, and external cables are NOT included.

Festo CMMP-AS-C2-3A-M3 Premium Servo Motor Controller w/ CAMC-DS-M1 Switch Module (Tested + Video)Item Condition: Used, Tested, and Verified FunctionBrand: FestoOrder nr.: 1501325 Rev 06HW version: 6.3FW version: 4.0.1501.2.1Main Part Number: CMMP-AS-C2-3A-M3 Module Part Number: CAMC-DS-M1Product OverviewUp for sale is a used, fully operational Festo CMMP-AS-C2-3A-M3 Premium Motor Controller, pre-installed with the CAMC-DS-M1 Switch Module. This highly dynamic servo drive is engineered for complex, multi-axis movements and synchronous tasks. The unit has been strictly tested in a closed-loop setup, and a dedicated test video is available to verify its operating condition prior to purchase.Ideal as a drop-in replacement to minimize machine downtime or for integrating into new automation builds.Technical Specifications1. Motor Controller: CMMP-AS-C2-3A-M3Controller Class: Premium (M3 variant with 3 extension slots for fieldbus, safety, or I/O cards)Nominal Input Voltage: 100 V ... 230 V AC (1-phase)Nominal Current: 2.5 APeak Current: 5 ASupported Motor Types: AC synchronous, linear, and torque motorsEncoder Interfaces: Supports standard high-resolution encoders (Resolver, EnDat, HIPERFACE, incremental)Control Functions: Position control, speed control, torque control, and electronic camming.Condition & TestingCondition: Used. The housing and terminals are in good structural condition with minor cosmetic wear expected from standard industrial cabinet mounting.Testing Rigor: The drive have been powered on and bench-tested.Video Proof: Watch a sample unit in action. All units tested to the same standard. The video demonstrates basic motor jogging.What’s Included in the Box(1x) Festo CMMP-AS-C2-3A-M3 Motor Controller(1x) Festo CAMC-DS-M1 Switch Module (Installed)(Note: Connectors, wiring, and external fieldbus cards are NOT included unless pictured. Please review the photos carefully to see exactly which terminal blocks are attached.)

Festo CMMP-AS-C2-3A-M3 Premium Servo Motor Controller w/ CAMC-G-S1 Safety Module (Tested + Video)Item Condition: Used, Tested, and Verified FunctionBrand: FestoOrder nr.: 1501325 Rev 08HW version: 6.5FW version: 4.0.1501.2.3 Main Part Number: CMMP-AS-C2-3A-M3 Module Part Number: CAMC-G-S1Product OverviewUp for sale is a used, fully operational Festo CMMP-AS-C2-3A-M3 Premium Motor Controller, pre-installed with the CAMC-G-S1 Safety Module. This highly dynamic servo drive is engineered for complex, multi-axis movements and synchronous tasks. The unit has been strictly tested in a closed-loop setup, and a dedicated test video is available to verify its operating condition prior to purchase.Ideal as a drop-in replacement to minimize machine downtime or for integrating into new automation builds requiring high-precision STO (Safe Torque Off) capabilities.Technical Specifications1. Motor Controller: CMMP-AS-C2-3A-M3Controller Class: Premium (M3 variant with 3 extension slots for fieldbus, safety, or I/O cards)Nominal Input Voltage: 100 V ... 230 V AC (1-phase)Nominal Current: 2.5 APeak Current: 5 ASupported Motor Types: AC synchronous, linear, and torque motorsEncoder Interfaces: Supports standard high-resolution encoders (Resolver, EnDat, HIPERFACE, incremental)Control Functions: Position control, speed control, torque control, and electronic camming.2. Safety Module: CAMC-G-S1 (Pre-installed)Safety Functions: * STO (Safe Torque Off)SS1 (Safe Stop 1)Safety Level: Designed to meet PL e (Performance Level e) / SIL 3 (Safety Integrity Level 3) requirements.Integration: Plugs directly into the Ext3 slot of the CMMP-AS drive.Condition & TestingCondition: Used. The housing and terminals are in good structural condition with minor cosmetic wear expected from standard industrial cabinet mounting.Testing Rigor: The drive and safety module have been powered on and bench-tested.Video Proof: Watch a sample unit in action. All units tested to the same standard. The video demonstrates basic motor jogging.What’s Included in the Box(1x) Festo CMMP-AS-C2-3A-M3 Motor Controller(1x) Festo CAMC-G-S1 Safety Module (Installed)(Note: Connectors, wiring, and external fieldbus cards are NOT included unless pictured. Please review the photos carefully to see exactly which terminal blocks are attached.)

Enhance your industrial automation capabilities with the Festo ELGR-TB-45-200-0H (Part Number: 560506) Toothed Belt Axis. Engineered for high-speed and precise linear positioning, this electromechanical actuator is an excellent choice for dynamic handling, assembly, and packaging applications.Manufacturer: FestoModel: ELGR-TB-45-200-0HPart Number: 560506Actuator Type: Toothed Belt Axis / Linear ActuatorSize: 45Stroke Length: 200 mmDrive Mechanism: Toothed Belt (TB)Application: Industrial automation, positioning, and linear motion controlCondition: Used - This component has been previously installed and operated but remains in solid working condition, ready to be integrated into your production line.