Brands

Axiomtek SHB120 Rev. A3-RC PICMG 1.3 CPU Card This listing is for a tested, working Axiomtek SHB120 PICMG 1.3 Single Board Computer (SBC). It is intended as a direct replacement part for industrial or technical systems. The board has been thoroughly bench-tested to ensure reliability. Processor Specifications CPU: Intel Core i5-2400 (Sandy Bridge) Core/Thread Count: 4 Cores, 4 Threads Clock Speed: 3.10GHz Base Frequency Socket: Socket 1155 LGA Max TDP: 95.0 W Memory Specifications Total Capacity: 8GB DDR3 Configuration: Dual-Channel (2x 4GB modules) Module Details: Kingmax Semiconductor FLGF65F-D8KJB UDIMM Motherboard & BIOS Information Northbridge: Intel Sandy Bridge rev. 09 Southbridge: Intel Q77 rev. 04 LPCIO: Winbond W83627DHG-P BIOS Brand: American Megatrends Inc. BIOS Version: 4.6.5 BIOS Build Date: 02/25/2016 Project Name: SHB120V.104 Testing & Verification Successfully booted into Active@ Boot Disk and validated hardware via CPU-Z. Memory stability verified using Memtest86+ v8.10; completed with 0 errors. Please verify compatibility with your backplane and existing system chassis prior to purchase. What you see in the diagnostic screenshots is exactly what is installed and included.

Agilent N4010A Wireless Connectivity Test Set Serial Number: MY52230237 Main Firmware Version: A.05.06.02 Installed Options: 102: WLAN (2.4 GHz) 110: I/O Connectivity Condition & Testing Notes: The unit powers on and boots successfully. We have performed a basic RF self-test using an external spectrum analyzer to verify fundamental signal output. Important Operational Note: Please be aware that this instrument is designed primarily for automated/remote operation via its interface ports. The front panel keyboard only provides access to basic system menu functions. This is the normal, intended behavior for this specific configuration. Internal Hardware & Firmware Information: As verified via the System Service menu: MB (N4010-60025): HW Id=1, FW=05 PPMC (P1001-66501): HW Id=2, HW=04, FW=A.05.06.02 LSS (N4010-60030): HW Id=3, HW=2011AR, FW=C.01.09 FrontEnd (N4010-61043): HW Id=4, HW=3, FW=16 DAP (N4010-60001): HW Id=5, HW=106, DSPApp=04.01, DSPBoot=01.06, FPGA=B0 FP (N4010-61001): HW Id=6, FW=P.15 FreqExt (N4010-61049): HW Id=7, HW=4, FW=07 BBG (N4010-60007): HW Id=8, FPGA=2 What's Included: 1x Agilent N4010A Wireless Connectivity Test Set (as pictured and described) Note: Power cords, remote control cables, and other external accessories are NOT included unless explicitly stated. Disclaimer: Sold as-is based on the testing described above. Please review all details and ensure you have the correct software/environment to drive this instrument remotely before purchasing.

Condition: Used, fully tested, and pulled from a working environment. This combo is ideal for technicians or IT professionals needing a reliable, direct replacement for an existing Advantech H310/Coffee Lake industrial setup. Component Specifications: Motherboard: Advantech AIMB-706 Chipset: Intel H310 (Coffee Lake) Socket: LGA 1151 BIOS Version: American Megatrends Inc. v5.13 (Date: 08/14/2019) Processor (CPU): Intel Core i3-8300 Base Clock: 3.70 GHz Cores/Threads: 4 Cores / 4 Threads Cache: 8MB L3 Cache TDP: 62.0 W Memory (RAM): 8GB Total Configuration: 1x 8GB Module Type: DDR4 UDIMM Speed: 2400 MHz Brand/Part Number: Kingston 9905702-017.A00G Testing & Verification: The system successfully posted and component specifications were verified using CPU-Z. The included memory module was stress-tested and successfully passed Memtest86+ v8.00 with zero errors. Please verify compatibility with your existing chassis, power supply, and peripherals prior to purchase. Ensure your operating system supports this hardware generation. Included items are strictly limited to the motherboard, CPU, and RAM and basic cabling as pictured.

Condition: Used, fully tested, and working. Ideal as a direct replacement for existing Kontron KTC5520/EATX deployments. Included Hardware: Motherboard: Kontron KTC5520/EATX Chipset: Intel 5520 Southbridge: Intel 82801JR (ICH10R) BIOS: American Megatrends Inc. Version 080016 (01/28/2011) Processors (Dual CPU): 2x Intel Xeon E5645 @ 2.40GHz Architecture: Westmere-EP (Socket 1366 LGA) Cores/Threads: 12 Cores / 24 Threads total (6 Cores / 12 Threads per CPU) Cache: 12 MBytes L3 Cache per CPU Memory: 32GB DDR3 ECC RAM Modules: Samsung M393B1G70QH0-CK0 Type: 8GB DDR3-1600 ECC RDIMM Testing & Verification: System successfully posted and booted into Windows 7 Professional 64-bit environment for CPU-Z verification. Passed comprehensive memory and CPU stress testing using Memtest86+ (v7.00). Completed 1 full pass with 0 errors over 1 hour and 23 minutes. Note to buyer: Please verify chassis and power supply compatibility before purchase. Sale includes motherboard, dual CPUs with heatsinks, and RAM as pictured + cables - no chassis.

RadiSys SB5520DT1-SATA Motherboard Combo - Dual Xeon X5650, 48GB ECC RAM This listing is for a tested and working RadiSys SB5520DT1-SATA motherboard combo. This industrial/server-grade hardware is ideal for technical professionals needing a direct replacement part or a solid foundation for a custom server/workstation build. Hardware Specifications Motherboard: RadiSys SB5520DT1 (Intel 5520 Chipset / ICH10R Southbridge). BIOS: American Megatrends Inc., Version 1.9.2 (Build Date: 07/02/2014). Processors: 2x Intel Xeon X5650 CPUs (Socket 1366 LGA). Cores/Threads: 12 Cores / 24 Threads Total (6 Cores / 12 Threads per CPU) running at 2.66GHz base clock. Memory: 48GB Total DDR3 ECC RAM. Included modules are Micron DDR3-1600 ECC RDIMMs (Part number: 18KSF51272PZ-1G6K1). Networking: Dual Onboard Intel Gigabit Ethernet Controllers. Video: Onboard Matrox VGA Controller. Hardware Monitoring: Winbond W83627DHG-P LPCIO. Testing & Condition This combo has been benched and rigorously tested to ensure functionality: Successfully POSTs and allows full access to the BIOS setup utility. Boots successfully into Windows operating system environments for hardware validation. System memory was tested using Memtest86+ v7.00 and completed a full pass with zero errors. Both CPUs and all installed RAM modules are correctly identified by the system and CPU-Z. What's Included 1x RadiSys SB5520DT1 Motherboard 2x Intel Xeon X5650 Processors (pre-installed) 48GB DDR3 ECC Memory (pre-installed) Note: Please ensure compatibility with your chassis and power supply before purchasing.

Fujitsu D3236-S13 GS2 Motherboard Combo with Intel Core i5-4460 & 4GB RAM Up for sale is a reliable, high-quality industrial/business-class motherboard bundle pulled from a working TERRA PC desktop system. This bundle includes the motherboard, processor, and memory, making it an excellent foundation for a budget workstation, replacement, or a robust home server/firewall setup. ⚠️ Important Search/Model Note: Fujitsu motherboards use several overlapping codes for the same PCB design. To help you find the exact drivers and documentation, this board is most commonly searched for under the following identifiers: Fujitsu D3236-S13 (Printed as Board GS on the BIOS screen) Fujitsu D3236-S1 (Reported by CPU-Z / Mainboard model) S26361-D3236-S1 (Fujitsu Part/Revision number) Bundle Components & Specifications Component Specification Details Motherboard Fujitsu D3236-S1 / S13 (Intel Q87 Express Chipset) Premium ATX form factor featuring a massive array of legacy and modern connectivity options. Processor (CPU) Intel Core i5-4460 * Clock Speed: 3.20 GHz (Turbo up to 3.40 GHz) * Cores/Threads: 4 Cores / 4 Threads * Cache: 6 MB L3 Cache * TDP: 84W Memory (RAM) 4 GB DDR3 Dual-Channel (Running at 1600 MHz) * Configuration: 2x 2GB modules * Manufacturer: Micron Technology * Expandability: 4 DIMM slots total, supports up to 32GB maximum. Graphics Integrated Intel HD Graphics 4600 (via the i5 processor). Key Features & Connectivity Dual Intel Gigabit LAN Ports: Exceptional networking performance featuring an Intel I217LM and an Intel I210AT controller—perfect for custom router/firewall builds (like pfSense/OPNsense) or network teaming. Triple Display Outputs: Outfitted with 2x DisplayPort 1.2 outputs and 1x DVI-I port, allowing multi-monitor setups without a dedicated graphics card. Abundant Expansion Slots: Includes 1x PCIe x16 slot, 1x PCIe x4 slot (housed in an x16 physical connector), 1x PCIe x1 slot, and 4x Legacy PCI slots for specialty/industrial expansion cards. Legacy Support: Features 2x Rear Serial (COM) ports (DB-9 male), 1x Parallel (LPT) port, and classic PS/2 keyboard/mouse connectors. Storage Connectors: 5x onboard SATA ports for multiple SSDs/HDDs or optical drives. Technical Condition This bundle is fully tested and verified working. The components have been kept clean in a well-ventilated business system. The BIOS is running version V4.6.5.4 R1.20.0.SR.1. Please note that it requires a standard power supply setup and an ATX-compatible chassis. With integrated IO shield and heatsink is included.

The GE Fanuc IC697PWR710E is a highly reliable 55-Watt power supply module designed for the Series 90-70 Programmable Logic Controller (PLC) system. It provides robust power distribution for your industrial automation rack, ensuring consistent performance in demanding environments.Manufacturer: GE FanucSeries: Series 90-70Part Number: IC697PWR710EModule Type: Power SupplyPower Rating: 55 WattsInput Voltage: 120/240 VAC or 125 VDCCondition: Used - This item has been previously used but is fully functional and ready for deployment in your control system.

Upgrade or maintain your industrial automation system with the GE Fanuc IC697CPX935-JE Series 90-70 Central Processing Unit. This high-performance CPU module is equipped with firmware version 8.11, delivering reliable processing power and advanced control capabilities for demanding industrial applications.Brand: GE FanucSeries: Series 90-70Part Number: IC697CPX935-JEFirmware Version: 8.11Module Type: CPU ModuleProcessor Speed: 96 MHz (80486DX4)Memory: 1 Megabyte Battery-Backed RAMCondition: NOB Open Box Old Stock , Tested

The GE Fanuc IC697CPX935-GE is a high-performance Central Processing Unit (CPU) module engineered for the Series 90-70 Programmable Logic Controller (PLC) platform. Operating on firmware version 8.11, this processor delivers robust control capabilities, efficient memory management, and reliable processing speeds for demanding industrial automation environments.Manufacturer: GE FanucProduct Series: Series 90-70Part Number: IC697CPX935-GEFirmware Version: 8.11Module Type: CPU Processor ModuleSystem Compatibility: Standard Series 90-70 BaseplatesCondition: Used, Tested - This module has been fully inspected and rigorously tested by our technical team to ensure complete functionality and reliability. No Battery just cable with connector included.

GE Fanuc IC698CPE010-JV PACSystems RX7i CPU Module (Firmware 6.01)The GE Fanuc IC698CPE010-JV is a high-performance Central Processing Unit (CPU) module designed for the PACSystems RX7i series. Engineered for complex industrial automation and control applications, this processor delivers robust computing power, extensive memory capacity, and seamless integration into existing RX7i backplanes.Manufacturer: GE Fanuc / EmersonSeries: PACSystems RX7iPart Number: IC698CPE010-JVModule Type: Central Processing Unit (CPU)Processor: 300 MHz Intel CeleronMemory: 10 MB Battery-Backed RAMApplication: Advanced industrial control and logic processingCondition: NOB, Tested (Old Stock Open Box spare, We tested this because it sat on the shelf as spare for long time, battery present and was not plugged in).

GE Fanuc IC693DSM302-AE Series 90-30 2-Axis Motion Control Module The GE Fanuc IC693DSM302-AE is a high-performance 2-axis motion control module designed for the Series 90-30 PLC platform. It provides precise and synchronized control for a variety of industrial automation applications, offloading complex motion tasks from the main CPU.Part Number: IC693DSM302-AEManufacturer: GE FanucProduct Family: Series 90-30Module Type: 2-Axis Motion Control Module (DSM300)Provides synchronized control for two servo axesInstalls in a standard Series 90-30 PLC rackFeatures onboard processing to reduce PLC CPU loadThis unit has been tested to ensure full functionality and reliability. Condition: Used

GE Fanuc IC693CPU351-GT Series 90-30 PLC CPU Module (CPU: 9.11 Daughterboard 16.00) The GE Fanuc IC693CPU351-GT is a high-performance Central Processing Unit (CPU) for the Series 90-30 Programmable Logic Controller (PLC) system. It is designed to handle complex control applications with its fast processor and significant user memory, making it a robust choice for industrial automation tasks.Part Number: IC693CPU351-GTProduct Line: GE Series 90-30Processor: 80386EXProcessor Speed: 25 MHzUser Memory: 74K Bytes (Configurable)Logic Execution Speed: 0.22 ms per 1K of logic (boolean)Built-in Ports: Two serial ports (RS-485 and RS-422/RS-485)Condition: Used, tested and confirmed to be in excellent working condition.

GE Fanuc IC693CMM321-JJ Series 90-30 Ethernet Interface ModuleThe GE Fanuc IC693CMM321-JJ is a high-performance Ethernet Interface module designed for the Series 90-30 Programmable Logic Controller (PLC) system. This module facilitates seamless integration of the PLC into an Ethernet TCP/IP network, enabling high-speed data exchange with other controllers, computers, and SCADA systems.Part Number: IC693CMM321-JJManufacturer: GE FanucSeries: Series 90-30Module Type: Ethernet Communications ModuleProtocol: TCP/IPData Rate: 10 MbpsConnectors: One RJ-45 (10BaseT) and one AUI portThis unit provides robust and reliable network connectivity for your industrial automation applications. Condition: Used, tested and verified to be in full working order.

GE Fanuc IC693ALG220D Series 90-30 4-Channel Analog Voltage Input ModuleThe GE Fanuc IC693ALG220D is a 4-Channel Analog Voltage Input module designed for the Series 90-30 Programmable Logic Controller (PLC) system. It provides a high-performance interface between the PLC and various analog field devices, converting real-world voltage signals into digital values for processing by the CPU.Platform: GE Fanuc Series 90-30Module Type: Analog Voltage InputNumber of Channels: 4 single-ended or 2 differentialInput Signal Range: Selectable ranges including -10V to +10V and 0V to +10VResolution: 12-bitUpdate Rate: 8 ms (all 4 channels)This module is ideal for applications requiring precise measurement and control of analog signals such as pressure, temperature, or flow. Condition: Used, tested and fully functional.

GE Fanuc IC693CHS397H Series 90-30 5-Slot Baseplate The GE Fanuc IC693CHS397H is a 5-slot baseplate designed for the Series 90-30 Programmable Logic Controller (PLC) system. It serves as the backbone for mounting I/O modules, CPU, and power supply, facilitating communication between them via the backplane.Manufacturer: GE FanucSeries: Series 90-30Part Type: 5-Slot I/O BaseplateModule Slots: 5 (for I/O, specialty, and CPU modules)Mounting Style: Panel MountBackplane: Integrated for high-speed communication between modulesCondition: Used. This unit has been fully tested and is in excellent working condition, ready for integration into your system.

GE Fanuc IC693CPU363-BG Series 90-30 CPU Module (CPU: 10.70, Daughterboard: 16.16)The GE Fanuc IC693CPU363-BG is a high-performance single-slot CPU module designed for the Series 90-30 Programmable Logic Controller (PLC) system. This specific unit features CPU firmware version 10.70, offering robust processing capabilities and reliable control for complex industrial automation applications.Manufacturer: GE FanucSeries: Series 90-30Part Number: IC693CPU363-BGCPU Firmware Version: 10.70Module Type: Central Processing Unit (CPU)Features: Built-in serial ports, advanced memory capacity, and high-speed processingCondition: Used, preventively replaced supercacitor. This unit has been professionally serviced to ensure long-lasting reliability and optimal performance in your control system.

GE Fanuc Series 90-30 Power Supply - IC693PWR321X The GE Fanuc IC693PWR321X is a high-reliability power supply designed for the Series 90-30 Programmable Logic Controller (PLC) system. It provides consistent and stable power to the CPU and I/O modules, ensuring dependable operation of your automation processes. This unit is a standard 30-watt supply capable of operating on either 120 or 240 VAC input.Part Number: IC693PWR321XManufacturer: GE FanucSeries: Series 90-30Product Type: Power SupplyInput Voltage: 120/240 VAC (Selectable)Output Power: 30 Watts TotalOutput Voltages: +5 VDC, +24 VDC (Relay Power), +24 VDC (Isolated)Mounting: Mounts on the left side of the baseplateCondition: This is a high-quality, tested Used unit in excellent working condition.

GE Fanuc IC693CPU311-AC Series 90-30 CPU Module (CPU: 8.21) The GE Fanuc IC693CPU311-AC is a Central Processing Unit (CPU) module for the versatile Series 90-30 Programmable Logic Controller (PLC) system. It is designed to handle basic control applications, executing logic to manage and automate industrial processes with reliability and efficiency.Part Number: IC693CPU311-ACProduct Family: Series 90-30 PLCUser Memory: 6K Bytes of RAMProcessor Speed: 5 MHzI/O Support: Up to 512 discrete I/O and 320 analog I/O pointsCommunication Port: Built-in RS-232 serial portLogic Scan Rate: 0.6 ms per 1K of logic (boolean)This module has been professionally refurbished and tested to ensure full functionality. Condition: Used, with a new supercapacitor installed for dependable memory retention.

GE Fanuc IC693CPU350-BE Series 90-30 CPU 350 Module ver. 10.00 Upgrade or maintain your industrial automation system with the GE Fanuc IC693CPU350-BE, a robust and highly reliable Series 90-30 Central Processing Unit. Designed for complex control applications, this CPU module delivers exceptional processing speed and memory capacity for your critical operations.Brand: GE FanucSeries: Series 90-30Part Number: IC693CPU350-BEVersion: CPU 10.00Module Type: CPU 350Features: High-speed processing, ample user memory, and seamless integration with Series 90-30 I/O modules.Condition: Used, preventively replaced supercapacitor. This unit has been professionally serviced to ensure long-lasting memory retention and reliable performance.

GE Fanuc IC693CHS398C Series 90-30 5-Slot Expansion BaseplateThe GE Fanuc IC693CHS398C is a 5-slot expansion baseplate designed for the Series 90-30 PLC system. It allows for the addition of I/O modules to expand the capabilities of your programmable logic controller setup. This baseplate connects to a CPU baseplate via an expansion cable, providing seamless integration and system growth.Manufacturer: GE FanucProduct Line: Series 90-30Part Type: 5-Slot Expansion BaseplateNumber of Slots: 5Module Compatibility: Accepts Series 90-30 I/O modulesMounting: Panel MountThis unit is a reliable and cost-effective way to enhance your existing automation infrastructure. Condition: Used

GE Fanuc IC693CHS397C Series 90-30 5-Slot Baseplate The GE Fanuc IC693CHS397C is a 5-slot baseplate designed for the Series 90-30 Programmable Logic Controller (PLC) system. It serves as the backbone for mounting I/O modules, CPU, and power supply, facilitating communication between them via the backplane.Manufacturer: GE FanucSeries: Series 90-30Part Type: 5-Slot I/O BaseplateModule Slots: 5 (for I/O, specialty, and CPU modules)Mounting Style: Panel MountBackplane: Integrated for high-speed communication between modulesCondition: Used. This unit has been fully tested and is in excellent working condition, ready for integration into your system.

GE Fanuc IC693CHS391K Series 90-30 10-Slot BaseplateThe GE Fanuc IC693CHS391K is a robust 10-slot baseplate designed for the Series 90-30 Programmable Logic Controller (PLC) system. It serves as the central backplane for mounting and interconnecting various I/O, CPU, and specialty modules, providing a reliable foundation for your industrial control applications.Product Type: 10-Slot BaseplateSeries: GE Fanuc Series 90-30Number of Slots: 10Compatibility: Accepts Series 90-30 I/O, CPU, and specialty modulesFunction: Provides backplane communication and power distributionMounting: Panel MountCondition: This is a tested Used item, ready for deployment in your system.

GE Fanuc IC693PWR330E Series 90-30 High Capacity Power SupplyThe GE Fanuc IC693PWR330E is a high-capacity power supply engineered for the Series 90-30 Programmable Logic Controller (PLC) system. It mounts in the leftmost slot of any Series 90-30 baseplate, providing 30 watts of power to the CPU, memory, and I/O modules for robust and reliable automation control.Manufacturer: GE FanucSeries: Series 90-30Input Voltage: 120/240 VAC or 125 VDC (Switch Selectable)Total Output Power: 30 WattsOutput Voltages: +5 VDC, +24 VDC (Relay Power), +24 VDC (Isolated)Features: Overcurrent and overvoltage protectionThis unit has been fully tested to ensure it meets original factory specifications. Condition: Used

GE Fanuc IC693CPU364-BF Series 90-30 CPU Module (CPU: 10.50, Daughterboard: 1.10)The GE Fanuc IC693CPU364-BF is a high-performance Central Processing Unit designed for the Series 90-30 Programmable Logic Controller (PLC) system. Engineered for demanding industrial automation applications, this module delivers robust processing speed, built-in Ethernet connectivity, and reliable control capabilities for complex machinery.Manufacturer: GE FanucSeries: Series 90-30Part Number: IC693CPU364-BFCPU Firmware Version: 10.50Daughterboard Version: 1.10Module Type: CPU ModuleCondition: Used, preventively replaced supercapacitor. This module has been carefully serviced with a new supercapacitor to ensure reliable long-term memory retention and optimal performance in your control system.3185